Cash-In-Drawer Limit Programming; Check Change Limit Programming - Sam4s ER-390M Operator's And Programming Manual

Cash-In-Drawer Limit Programming

You can set a cash-in-drawer limit. When cash in drawer exceeds the limit a warning will display on
the screen. You must press CLEAR to remove the warning and continue operations. The warning will
continue to appear at the completion of every transaction with the limit exceeded, until you use the
PAID OUT function to remove cash from the drawer.
Programming the Drawer Limit

Check Change Limit Programming

Use this program to set the maximum amount of cash that can be returned when a check is tendered
for an amount greater than the amount of the sale. For example, if the check change limit is $10.00 the
maximum amount that can be tendered into the check key on a $5.00 sale is $15.00.
Programming the Check Change Limit
ER 390M Electronic Cash Register v1.2
1. Turn the control lock to the P position.
2. To begin the program, enter 1 1 0 0, press the SBTL key.
1 1 0
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key.
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finalize the program.
CASH
1. Turn the control lock to the P position.
2. To begin the program, enter 1 2 0 0, press the SBTL key.
1 2 0
3. Enter a cash-in-drawer limit (up to 8 digits or 0 for no limit); press the X/TIME key.
Enter the cash
limit, up to 8
digits
4. Press the CASH key to finalize the program.
CASH
0 SBTL
X/TIME
0 SBTL
X/TIME
P-Mode Programming • 113