Page 1
SAM4s ER-390M Quick Start Programming Guide There are a few areas that need planning before you can begin to program the register. These areas are: 1. Keyboard Layout. There are 60 item keys that can be programmed (keys 1-60). 2. Item Descriptions.
Page 2
Use the keyboard below to help layout the item locations. You can use any key that is not crossed out. This keysheet can be cut out and placed over the register’s keyboard while programming. You will still use the X/TIME, SBTL, and CASH keys for programming even though they are crossed out.
Page 3
Use this page to help layout all of the programming information. In the Open/Preset & tax value # column, enter the number that corresponds with the tax and price settings, see below: Preset Taxable = 6 Open Taxable = 0 Preset No Tax= 7 Open No Tax = 1 *Only 42 out of 60 items are listed, make copies of this page if you are using more than 42 items.
Page 4
1. Load Printer Paper b. Enter 1300, then press the SBTL key. d. Enter the item description, up to 12 characters in length. a. Load the roll of paper into the printer. c. Enter the time using the 24 hr.format. The paper must unroll from the side d.
Page 5
f. Repeat from step 8.c to 8.e for the a. Turn the key to the PGM position. Skip this section if you are not using remaining items. Then proceed to integrated credit. b. Enter 700, then press the SBTL key. step 8.g.