Receipt On Request; Training Mode - Sam4s ER-390M Operator's And Programming Manual

Receipt on Request

If a customer requests a receipt after a sale has been finalized, a second depression of the CASH key
will issue a complete buffered receipt.

Training Mode

A training mode is available so that you can operate the cash register without updating totals and
counters. Note the following conditions:
•
•
•
•
To Enter Training Mode
To Exit Training Mode
38 • Operations
Print the message "TRAINING MODE BEGIN" when training mode is activated.
Print the message "TRAINING MODE END" when training mode is exited.
The message "TRAINING MODE" prints while training mode is active (if print option #13
is set to yes.)
The total and counter on the financial report labeled "TRAIN TTL" is updated with the net
amount of each training transaction.
1. Turn the control lock to the X position.
2. Enter 88, press SBTL, enter 4 digit secret training code, press X/TIME, press CASH.
(See System Option program to set traing mode code.)
1. Turn the control lock to the X position.
2. Enter 88, press SBTL, enter 0000, press X/TIME, press CASH.
ER 390M Electronic Cash Register v1.2