Sam4s ER-390M Operator's And Programming Manual page 112

Hide thumbs Also See for ER-390M:

Table of Contents

Programming the Macro Name

Up to ten function locations may be designated as Macro keys. You may wish to program a name for a

macro. For example if a macro executes a series of commands to produce daily reports, you can

program the descriptor "DAILY", so the macro can easily be identified. Macro names can also be

helpful when looking at keyboard layout information with the PC communication utility.

110 • P-Mode Programming

1. Turn the control lock to the P position.

2. To begin the program, enter 7 1 1, press the SBTL key.

3. Enter the number of the Macro you wish to program (1-10); press the X/TIME key.

X/TIME

4. Enter up to 12 three-character codes and press the X/TIME key. (See "Descriptor Code

Chart" on page 74.)

Enter up to 12

three-character

codes

Or, insert the Alpha Keyboard Overlay (see "Alpha Program Overlay" on page 74), type

up to 12 characters and press the X/TIME key.

Type up to 12

characters

5. Press the CASH key to finalize the program.

CASH

SBTL

ER 390M Electronic Cash Register v1.2

Table of Contents