Function Key Assignment Programming - Sam4s ER-390M Operator's And Programming Manual

Function Key Assignment Programming

Function keys may be relocated, inactivated or changed with this program. For example, you may
wish to place functions, such as TAX SHIFT 3 and CURRENCY CONVERSION, which are not
placed on the default keyboard. Or perhaps, you may wish to remove a function, such as CANCEL,
for security reasons.
Please note the following limitations:
•
•
•
•
To Assign a Function Key to a Location
ER 390M Electronic Cash Register v1.2
If you assign a duplicate of a function code, the duplicate will function exactly as the
original - you will not get separate totals and counters on reports for the duplicated key.
The following keys are fixed and must remain in their original locations: 0-9, 00, Decimal,
CLEAR, SBTL and CASH.
PLUs must be placed within the default block of 60 PLU locations. However, you may
relocate specific PLUs to new locations with the PLU key area. For example, you may
wish to locate PLU #100 in the default location for PLU #1.
Functions may be located anywhere on the keyboard, except the locations reserved for the
0-9, 00, Decimal, CLEAR, SBTL and CASH keys.
1. Turn the control lock to the S position.
2. Enter 7 0 and press the SBTL key.
7 0 SBTL
3. Refer to the next page to find the code for the key you wish to assign. Enter the code and
press the location you wish to program. Repeat this step to assign another key.
Key Code
4. Press the CASH key to finalize key assignment programming.
CASH
Key
Location
S-Mode Programming • 57