Program 80 - Function Key Descriptor - Sam4s ER-390M Operator's And Programming Manual

Program 80 - Function Key Descriptor

Descriptor Programs for the #/No Sale Key - Programs 80 & 81
Since two distinct functions, # entry and no sale, reside on the same key, different programs are used
to program each descriptor.
To program the no sale descriptor:
8
To program the # descriptor:
8
ER 390M Electronic Cash Register v1.2
1. Turn the control lock to the P position.
2. To begin the program, enter 8 0, press the SBTL key.
8 0 SBTL
3. Enter up to 12 three-character codes and press the X/TIME key. (See "Descriptor Code
Chart" on page 74.)
Enter up to 12 three-
character codes
Or, insert the Alpha Keyboard Overlay (see "Alpha Program Overlay" on page 74), type
up to 12 characters and press the X/TIME key.
Type up to 12
characters
4. To program additional function keys, repeat from step 3, or press the CASH key to
finalize the program.
CASH
Enter up to 12 characters
0 SBTL
Enter up to 12 characters
1 SBTL
X/TIME
X/TIME
#/NS
#/NS
CASH
CASH
P-Mode Programming • 89