Scale Tare Weight Programming - Sam4s ER-390M Operator's And Programming Manual

Scale Tare Weight Programming

A tare is the amount of weight representing the container, or package when items are sold by weight.
You can pre-program five tare weights, representing the weight of different containers. When you
place an item and a container on optional scale, you can enter the tare number to automatically subtract
the pre-programmed tare weight.
If you choose to use tare #5 for manual tare weight entry, do not enter a weight for tare #5. (See
TARE.)
ER 390M Electronic Cash Register v1.2
1. Turn the control lock to the P position.
2. To begin the program, enter 1 4 0 0, press the SBTL key.
1 4 0
3. Enter the number (1-4) of the tare you wish to program; press the X/TIME key.
X/TIME
4. Enter the weight of the tare (one digit preceding the decimal key, the decimal key, then
three digits after the decimal key). Press the SBTL key.
.
5. To program additional tare weights, repeat from step 3, or press the CASH key to
finalize the program.
CASH
0 SBTL
SBTL
P-Mode Programming • 115