Handsfree Answerback - Toshiba PERCEPTION 4000 User Manual

Proprietary digital telephone
Hide thumbs Also See for PERCEPTION 4000:
Table of Contents

Advertisement

PERCEPTION 4000
To Use Handsfree Answerback:
1. Respond to the caller. There is
no need to lift the handset.
7. Speed Calling numbers and Autodial access keys can be used to
dial the numbers of conference members.
8. If an attendant is being used to set up a conference, eight station
members can be joined in a conference. The attendant does not
count as one of the eight allowable conference members.
9. If an attendant drops out of a conference and the "master" station is
no longer a member of the conference, the last-added party that has
"master" station capability will become the new "master" station and
will be able to add/release new parties. If none of the remaining
parties have this capability, the conference will continue without a
master and no additional parties can be added or released.

HANDSFREE ANSWERBACK

You can respond to voice calls on your station's prime line or intercom
line, without lifting the telephone handset. When a voice call appears at
your telephone, Speakerphone Operation is automatically activated. This
allows you to respond and continue to converse with the caller for the
duration of the call. At any point, you can activate handset operation by
lifting the telephone handset.
After receiving a voice call from a calling station:
Speakerphone Operation will continue for the duration of the call unless
the handset is lifted.
At any point during the call, you can lift the telephone handset to return
the station to handset mode. If your station had previously been
registered for Speakerphone Operation (Microphone and Speaker keys
activated), you must reactivate the feature manually.
Unless you select a specific line on which to make your call, you will
automatically access the line provided by your telephone's line
preference type. If your station has no line preference, you must press
the desired line key before dialing.
At any point during call placement or operation, you can switch back to
handset mode by picking up the telephone's handset. To return back to
Speakerphone Operation, press the SPEAKER key and hang up your
telephone.
FEATURE OPERATION
4-35

Advertisement

Table of Contents
loading

Table of Contents