Autodial - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Program an Autodial Key:
1. Press the Program Mode
(PRGM) access key.
2. Press the Autodial (ADL)
access key that you want to
program.
3. Press the desired line
appearance key.
4. Enter any applicable trunk
access code or Least Cost
Routing (LCR) access code.
4-6
3. An entered authorization code applies only to the line to which it has
been applied. Other line appearances on a dialing telephone retain
their original calling restrictions.
4. If a station establishes a call via the use of an authorization code
and later uses either Three-way Calling or the Call Hold feature, the
authorization code's allowances will still apply to the line used to
place the call.
5. If a call made through the entrance of an authorization code is
camped-on to a busy destination, the authorization code will be
applied during a camp-on callback. The authorization code
allowances will not be in effect during the time interval between the
station hang-up and the camp-on callback.

AUTODIAL

You can program each of your telephone's Autodial access keys so that
a directory number, station number, intercom number, trunk access code,
feature access code, or account code will be automatically dialed
whenever the key is pressed. Line selection can be programmed into the
Autodial sequence so that the preferred line will be automatically
accessed before the programmed number is dialed. An Autodial key that
is programmed to call a station can be specified to perform a voice call to
the station. More than one Autodial key can be used during the same call
to dial different parts of the desired number or code. The programming of
Autodial keys takes place in the telephone's Program Mode.
The PRGM LED will light solid green.
The ADL LED will flash green.
A line appearance key should be pressed only if you want the call to be
placed over a line other than the line designated by your telephone's line
preference type.
Any entered codes will be included as part of the Autodial sequence.
PERCEPTION 4000 HDT2020SD digital telephones will display the
entered codes.
FEATURE OPERATION