Call Forward - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Forward Calls (Not
Preregistered):
1. From an idle telephone, press
the Call Forward —All Calls
(CFAC), Call Forward—No
Answer (CFNA), or Call
Forward—Busy/No Answer
(CFBN) access key.
. . . or . . .
Enter the appropriate Call
Forward access code.
2. Dial the destination number.
NOTES:
1. Automatic Answer can be activated while a telephone is in either an
idle, ringing, or talk state. If the feature is activated while a call is in
process, Automatic Answer will apply to the next incoming internal or
intercom call (or internal/external call in the case of an ACD line).
2. Automatic Answer can be canceled while a telephone is in either an
idle or talk state. If the feature is canceled while a call is in progress,
the next call to the station will ring as a normal call.

CALL FORWARD

You can forward incoming calls that are directed to your station's prime
line, to another internal location (another station, an attendant, a
message center, etc.) or to an off-premises location. Calls can be
forwarded based on either an all calls, no answer, or busy/no answer
condition. The Call Forward feature is activated through the use of a
designated Call Forward—All Calls (CFAC), Call Forward—No Answer
(CFNA), or Call Forward—Busy/No Answer (CFBN) access key, or
through the use of feature access codes. Any of these Call Forward
feature types can be assigned to a Preregistered Call Forward (PRCF)
access key, which is used to forward calls to a specific destination. This
allows you to conveniently forward calls to a certain location, without the
need to dial a destination number.
Listen for recall dial tone. (If activating Call Forward from an idle on-hook
telephone, no tones will be heard.)
When using a Call Forward access key, the key's LED will flash green. If
the LED turns red, this feature is denied at your station.
When dialing an off-premises number, include any desired trunk access
code or Least Cost Routing (LCR) access code. (See Notes 2 and 3.)
If successfully activated, the Call Forward LED will light solid green or
you will hear success tone. If misdialed, the LED will turn red or you will
hear reorder tone.
FEATURE OPERATION
4-9