Call Park - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Place a Call on Hard Hold:
1. Inform the connected party
that he/she is being placed on
hold.
2. Press the HOLD key.
To Place a Call on Exclusive
Hold:
1. Inform the connected party
that he/she is being placed on
hold.
2. Press the HOLD key twice.
To Retrieve a Call on
Hard/Exclusive Hold:
1. Press the line appearance key
on which the call is being held.
2. Wait to be connected to the
held call.
The LED associated with the line appearance on which the call is held,
will flash green. Other stations with this same line appearance will
indicate the held call through a flashing red LED.
If a held call is not retrieved within a predetermined time period, the call
will recall your station on the line on which it was held.
The LED associated with the line appearance on which the call is held,
will flash green. Other stations with this same line appearance will
indicate that the line is in use, through a solid red LED.
If a held call is not retrieved within a predetermined time period, the call
will recall your station on the line on which it was held.
The key's LED will light solid green.
NOTE:
If the held party hangs up before the call is retrieved, the line appearance
LED will go out and, if you attempt to retrieve the call, you will hear dial
tone.

CALL PARK

By using the Call Park feature, you can hold an active call at any
extension, and then retrieve the call at the same (Local) or another
(Remote) extension. Calls can be parked on any prime or logical line,
FEATURE OPERATION
4-13