Handsfree Answerback/Speaker Cut-Off - Toshiba Perception e&ex User Manual

DIGITAL TELEPHONE
1B. Lift the handset.
2B. Dial the access code (# #
_____.
3B. Hang up.
To Answer a Call Handsfree:
1. Listen to a single tone.
2. Speak in the direction of the
telephone.
3. Lift the handset to speak
privately.
14
... or ... (if a DND
You will hear dial tone.
2)
Do Not Disturb will be canceled.
NOTES:
1. Outgoing calls and features will still function while the telephone is
in the DND mode; however, the telephone will appear to be busy to
any incoming calls.
2. The activation of Do Not Disturb will not interfere with Internal
Paging.

HANDSFREE ANSWERBACK/SPEAKER CUT-OFF

This feature allows you to reply handsfree on voice page calls and
(optionally) on the following types of calls:
I Station-to-Station calls on standard
I Calls from the attendant console.
NOTE: If the Speaker Cut-off (SCO) feature is activated (SCO LED on),
the Handsfree Answerback feature will be disabled and all calls will ring
your telephone in the usual manner.
The DN LED will indicate In-use status, the SCO LED will flash, the
SPKR LED will flash, and the MIC LED will light steadily.
NOTE: If the attendant, Attendant-Position Digital Telephone, or another
station is announcing an outside call and you do not pick up the handset,
the handsfree connection will be broken when the announcer releases,
and the outside call will ring the
button is not provided)
DN buttons.
DN button in the usual manner.
PERCEPTION e
ex
&