Handsfree Answerback; Conference Calls; Handsfree Monitoring; Message Waiting - Toshiba Strata DK DKT 2000-Series Quick Reference Manual

Call Transfer with Camp-on
To Transfer a call
1. While on a call, press
2. Dial a [DN].
3. Announce the call, then hang up.
If the station is busy, hang up and the call
"camps on" the called number. When the
called number is available, the "camped on"
party is connected. If the called party does
not answer after a certain time, the call rings
back to you.

Conference Calls

To make a Conference Call
1. While on a call, press
2. Dial a [DN] (or access an outside line and
dial an external telephone number).

3. Press after the called party answers.
All parties are conferenced together.
If you added an outside line to the call, press

again before hanging up to allow
the outside parties to continue talking. (If
you do not, the call is disconnected).
Note
Some types of outside lines
("unsupervised") do not automatically
disconnect when conferenced parties
hang up. In this case, press one of the
flashing buttons to monitor the
conference.
If the parties are still on the line, press
 %
+ , then hang up. When no one is
%
on the line, press
lines.

Do Not Disturb

To activate/deactivate Do Not Disturb
 ) "
To activate, press
ON).
To deactivate, press
(LED OFF).
6

.

.

to disconnect the
(LED
 ) "
again
Digital Telephone
Quick Reference Guide
Hold
To place a call on Hold
0
Press .
To retrieve a Held call
Press the held (flashing) line or [DN].
To place a call on Exclusive Hold
While on a call, press
can accidentally pick up your call.)

Handsfree Answerback

To receive a Handsfree Answerback call
You hear a single warning tone followed by the
caller's voice.
Without lifting the handset, speak toward the
telephone at a normal voice level.

Handsfree Monitoring

To use Handsfree Monitoring
1. While off-hook on a call, hold down
and place the handset on-hook.
%
2. Release .
3. Lift the handset to resume the conversation.

Message Waiting

To leave a Message Waiting Indication at
another station
After reaching a busy or unanswered station,
1". /
press or .
To answer a Message Waiting at your station
A flashing Msg LED indicates message waiting.
1".
Press , lift the handset. If the message
sender does not answer, go on-hook and
repeat this step to skip to the next message.
To cancel a Message Waiting for a station
 
Press [DN] +
Override/OCA
To make a Busy Override or OCA call
+
Dial after dialing the busy station
Digital Telephone
Quick Reference Guide
0
twice. (No one
%
.
7