Last Number Redial - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Place a Call via Last Number
Redial:
1. Press the Last Number
Redial (REDIAL) access key.
2. When the called party
answers, continue the call as a
regular call.
NOTES:
1. When answering an intercom call, the intercom line must be
manually selected, unless your telephone has r inging line
preference. An intercom line will not be automatically selected by any
other type of line preference.
2. All LED indications associated with an intercom line are the same as
those for any other line type (I-Use, I-Hold, etc.).
3. You can only place an intercom call to a member of your intercom
group. An intercom call can only be answered at your station. Other
intercom group members cannot answer the call via the Call Pickup
feature.
4. An attendant console cannot be accessed via an intercom line and
cannot place calls via an intercom line.
5. If Automatic Answer is activated at your station, you can respond to
intercom calls without lifting the telephone handset.
6. Your station can belong to any number of intercom groups allowed
by the PERCEPTION 4000 system. Your station will have a separate
intercom line key for each intercom group of which it is a member.

LAST NUMBER REDIAL

You can automatically redial the last number dialed from your telephone,
by pressing the Last Number Redial access key. The number stored by
your telephone for Last Number Redial can consist of up to 24 digits,
which can include dialing prefixes such as authorization codes, trunk
access codes, and account codes.
The last complete number that was successfully dialed from your
telephone (receiving no reorder tone) will be automatically redialed.
PERCEPTION 4000 HDT2020SD digital telephones will display the
redialed number.
You will hear ringback tone if the destination is idle.
If the destination is busy or does not answer, your operational
alternatives are the same as when a call is dialed manually (Camp-on,
Message Waiting, etc.).
FEATURE OPERATION
4-39