Toshiba PERCEPTION 4000 User Manual page 60

Proprietary digital telephone
Hide thumbs Also See for PERCEPTION 4000:
Table of Contents

Advertisement

PERCEPTION 4000
To Cancel Do Not Disturb:
1. Press the DND key.
. . . or . . .
Enter the Do Not Disturb
Cancellation access code.
4-32
When using a DND key, the DND LED will go out.
Any Do Not Disturb display information will be extinguished.
When using a feature access code, you will hear success tone. After
hearing this tone, hang up.
NOTES:
1. A station that has Do Not Disturb registered can still receive intercom
calls.
2. If your telephone has multiple lines and Do Not Disturb is registered,
you may receive visual indications of calls to lines other than your
prime line. Calls to any of these additional lines will cause the line's
LED to flash green, and HDT2020SD digital telephones will display
caller information. You can answer each of these calls by pressing
the ringing line key. Calls to your telephone's prime line will not
generate any visual or audible indications.
3. If your telephone has Do Not Disturb registered, calls to your prime
line will appear on other telephones that have a secondar y
appearance of the line. These calls may ring and/or display, based
on the configuration and state of the telephones.
4. If your station has Do Not Disturb registered and also has Call
Forward—All Calls or Call Forward—Busy/No Answer activated,
incoming calls will be forwarded to the assigned destination. Since
Do Not Disturb activation creates a busy condition, Call Forward—No
Answer will not route calls to a Do Not Disturb station's Call Forward
destination.
5. You cannot camp-on to a station that has Do Not Disturb registered.
Only attendants can override the Do Not Disturb condition and camp
calls onto these stations.
6. When Do Not Disturb is registered, Camp-on callbacks, Call Hold
recalls, and Call Park recalls will still ring at the station.
7. Calls will not be forwarded to a station that has Do Not Disturb
registered. Instead, the calls will either ring the called station, or will
forward to the Do Not Disturb station's Call Forward destination.
8. You can leave a message for a station that has Do Not Disturb
registered; however, you cannot place message callbacks to a Do
Not Disturb station.
9. An attendant can override a station's Do Not Disturb mode and
either ring the station or camp a call onto the station.
FEATURE OPERATION

Advertisement

Table of Contents
loading

Table of Contents