Swap - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
. . . or . . .
Enter the Speed Calling—
System or Speed Calling—
Group access code.
2. Enter the desired Speed
Calling index number.
3. If the entered index number
represents only part of the
destination number, dial any
remaining call digits.
4-52
If you attempt to access Group Speed Calling and your station does not
belong to a Speed Calling group, you will hear reorder tone.
Each Speed Calling index number represents the placement of its
associated number sequence in the System or Group Speed Calling
number listing. Enter three digits (000 ~ 999) for System Speed Calling,
or one digit (0 ~ 9) for Group Speed Calling.
The number sequence associated with the Speed Calling index number
will be dialed.
Listen for ringback tone.
The entire number sequence will be dialed. Listen for ringback tone.
The call will proceed as a regular call.
NOTES:
1. You can place a current call on "soft hold" by pressing the
CONF/TRNS key, and then place a call via Speed Calling. To return
to the held call, press the Release (RLS) key.
2. A Speed Calling access code and index number can be assigned to
an Autodial key.
3. While using Speed Calling, you will hear reorder tone if you enter an
invalid Speed Calling access code or index number; if your station is
restricted from accessing the call destination; or if your station is
restricted from the route used for the call.

SWAP

The Swap feature allows you to automatically swap calls when you are
connected to one party and receive a Call Waiting indication. The Swap
feature is activated by using a designated Swap access key or code.
When using a Swap key, the feature can also be used to alternate
between calls during Consultation Hold.
FEATURE OPERATION