Privacy Release - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Activate Privacy Release:
1. Establish a two-way
connection on an open line.
2. Press the Privacy Release
(PRLS) access key.
3. To enter the conversation, the
other station party presses the
flashing line appearance key.
4-48

PRIVACY RELEASE

When you are involved in a call on a multiple-appearing line, you can
temporarily release the line's privacy feature. This enables another
station with the same line appearance to join the call and form a three-
way connection. Once the call is over, the line's privacy feature is
reinstated, prohibiting stations with the same line appearance from
entering into an existing conversation.
The line appearance key's LED will light solid green.
The PRLS LED will flash green.
The line appearance key's LED on other telephones with the same line
appearance, will flash green.
The line appearance key's LED on your telephone will remain solid
green.
The PRLS LED on your telephone will light solid green.
The line appearance key's LED on the joining telephone will light solid
green.
The line appearance key's LED on other stations with the same line
appearance, will light solid red.
The other station will now be joined to the existing call, creating a three-
way connection. The connection will continue until one or more of the
parties disconnects. If only one party disconnects, the remaining two
parties will be connected in a normal two-way connection.
NOTES:
1. Only one additional station can be joined to an existing conversation.
If more than one party attempts to join, only the first will be accepted.
The other(s) will hear quiet tone.
2. If the PRLS LED flashes red twice when you press the PRLS key,
this indicates that the PERCEPTION 4000 system cannot find an idle
conference circuit. If this occurs, try the conference later.
3. Privacy Release is not available if you currently have a call on "soft
hold."
FEATURE OPERATION