Hotline; Intercom Access - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
To Place a Call via a Hotline:
1. Preselect the hotline by
pressing its line appearance
key (Speakerphone
Operation).
. . . or . . .
Take your telephone off-hook
and press the hotline line
appearance key (Handset
Operation).
. . . or . . .
Take your telephone off-hook
(if the hotline is accessed as a
result of your telephone's line
preference type).
2. Wait for the called party to
answer.
Off-hook status will initiate dial tone and will illuminate the line
appearance key's LED and the HSC LED steady green.
Returning the telephone to on-hook status by pressing the HSC key
again will turn off both LEDs.
NOTE:
Line preference guidelines for a telephone during headset operation are
the same as those that apply to the telephone during handset operation.

HOTLINE

If your station has a designated hotline, you can access the destination
of the hotline simply by pressing its dedicated line key, or (if provided by
your telephone's line preference type) by taking your telephone off-hook.
The destination number does not need to be dialed.
Listen for ringback tone.
The hotline line appearance key's LED will light solid green.
The destination number associated with the hotline will be automatically
dialed.
Once the connection is made, the call will be treated as a regular call. If
the call is placed on "soft hold" by pressing the CONF/TRNS key, the
hotline can be used to place another call or to access features.

INTERCOM ACCESS

If your telephone has an intercom line, you can call a station within your
intercom group while that station is in any call state. An intercom call also
rings through to a station when certain features which normally prevent
FEATURE OPERATION
4-37