Do Not Disturb - Toshiba PERCEPTION 4000 User Manual

PERCEPTION 4000
2. Dial the destination number.
To Register Do Not Disturb via
Feature Access Key:
1. Press the Do Not Disturb
(DND) access key.
To Register Do Not Disturb via
Feature Access Code:
1. Press the CONF/TRNS key to
place any current caller on
"soft hold."
. . . or . . .
Access your telephone's idle
prime line.
2. Enter the Do Not Disturb
Registration access code.
3. Press the Release (RLS) key
to return to any held caller.
If your station is restricted from accessing the selected trunk group, you
will hear reorder tone.
If the dialed trunk group is busy, you can camp-on until the trunk
becomes idle.
Listen for ringback tone.
The call will proceed as a regular call.

DO NOT DISTURB

You can place your telephone in Do Not Disturb mode to deny calls to
your telephone's prime line. When Do Not Disturb is registered, callers
will hear busy tone, although an attendant can override Do Not Disturb to
route calls to a station. The activation of Do Not Disturb does not affect
outgoing feature operation.
Do Not Disturb will be registered.
The DND LED will light solid red.
PERCEPTION 4000 HDT2020SD digital telephones will display Do Not
Disturb status.
Listen for success tone. Do Not Disturb will now be registered.
FEATURE OPERATION
4-31