Toshiba PERCEPTION 4000 User Manual page 50

PERCEPTION 4000
To Perform an On-hook Camp-
on:
1. Remain off-hook and wait for
busy tone to change to
success tone.
. . . or . .
Press the Camp-on (CAMP)
access key and listen for
success tone.
. . . or . . .
Press the CAMP soft key and
listen for success tone.
2. Hang up.
3. When the called party hangs
up, you will receive a camp-on
callback to your station's prime
line. Answer the callback.
To Manually Cancel a
Registered Camp-on:
1. Press the Camp-on (CAMP)
access key.
. . . or . . .
Enter the Camp-on
Cancellation access code.
4-22
After placing a call and receiving busy tone:
You will be camped-on to the busy destination.
After answering the callback, your call will ring the destination.
From an idle telephone:
If you used a Camp-on Cancellation code, listen for success tone.
NOTES:
1. When reaching a busy destination, alternatives to the activation of
Camp-on are either to hang up or to register a Message Waiting
indication.
2. In the case of a station-to-station call, the busy party may receive a
Call Waiting signal to indicate that you have camped-on to the busy
line. The called party can then access your call.
3. While waiting for a camp-on callback, you can make additional calls;
however, the callback will not occur until your station's prime line is
idle. All callbacks will ring your station's prime line, regardless of the
line appearance that was used to initiate the camp-on.
FEATURE OPERATION