Operation Without The Controller - Rinnai Neo Operation Manual

Operation without the controller

If you lose your controller, or the batteries go flat, you can still operate your unit using
the control panel on the appliance.
Turning the heater on
Press the ON/OFF button once, you will hear the
electronic ignition sparker. The electronic ignition stops
when the pilot flame is established, the main burner then
ignites off the pilot and will go to the highest setting. The
blue LED power indicator will stay on, indicating the heater
is in operation. Flame height may be adjusted after one
minute of operation.
To change the burner and fan settings press the UP and
DOWN arrows to increase or decrease the flame height.
Turning the heater off
Press the ON/OFF button once. The blue LED power
indicator will turn off indicating that the appliance is in the
off position.
LED indicators
On = blue
Standby = red
Off = nothing
16 | Neo operation guide: 11907-E 05-14
ON/OFF
LED power
indicator
Increase
Decrease
ON/OFF
LED power
indicator
Increase
Decrease
Flame Fan
height speed
The relationship between
1 high
the flame height and fan
speed is preset and cannot
2 low
be independently adjusted.
3 low
4 low
5 high
6 high
7 high