Operation Without The Controller - Rinnai Neo Series Operation Manual

Operation without the controller

For manual models, if you lose your controller, or the batteries go flat, you can still
operate your unit using the control panel on the appliance.
turning the heater on
Press the ON/OFF button once, you will hear the electronic ignition sparker. The electronic
ignition stops when the pilot flame is established, the main burner then ignites off the pilot and
will go to the highest setting. The blue LED power indicator will stay on, indicating the heater is
in operation. Flame height may be adjusted after one minute of operation.
To change the burner and fan settings press the UP and DOWN arrows to increase or decrease
the flame height. The relationship between the flame height and fan speed is preset and cannot
be independently adjusted, refer table below for preset settings.
Flame height
1
2
3
4
5
6
7
turning the heater off
Press the ON/OFF button once. The blue LED power indicator will turn off indicating that the
appliance is in the off position.
Control panel position on a standard frame (position is the same for all Neo models)
ON/OFF
LED power indicator
Increase
Decrease
16 | Neo operation guide: 11907-E 05-14
Fan speed
high
low
low
low
high
high
high
On
Standby
Off
= blue
= red
= nothing