Operation Without The Remote - Rinnai Arriva 752 Operation Manual

Operation without the remote

Ignition
This appliance has a sealed
combustion chamber that requires
purging before gas can flow and
the unit can start. This means the
combustion fan will start several
seconds before the unit comes on.
Normal ignition sequence:
1. when the On/Off button is
pressed on the control panel,
the LED will glow red and the
combustion fan will start.
2. The ignition sparker will
operate and as soon as a
spark is sensed gas will flow to
the main burner.
3. when the main burner has
established, the heater will
automatically modulate
between the burner settings
to achieve and maintain the
default set temperature of
22 °C.
If the heater is turned off using
the On/Off button on the heater
control panel, when it is turned
back on, it will lose any timer
and clock settings until the
remote is used to re-transmit the
information. The remote stores
the clock, timer, and temperature
settings of the heater.
Do not unplug power supply
Do not unplug the main power
supply to turn the unit off as
the convection fan is required to
operate for several minutes after
the unit is turned off to assist in
cooling the unit down.
8 | Arriva 752 Operation Guide: 12219-A 01-12