Answering And Ending A Video Call - RADVision Scopia XT5000 Series User Manual

Answering and Ending a Video Call

You can answer calls manually or set the system to answering the call automatically:
• If you set your system to automatic answering, the endpoint answers after the predefined number
of rings (see
• If you set your system to manual answering, you can either accept or reject the incoming call.
When there is an incoming call, the system displays a window with these options
28: Answering a video call
Table 6: Accepting and rejecting calls using XT Remote Control Unit
Accept
Reject
Do not disturb
Disconnect the call by pressing Disconnect
Confirm disconnection, select ok/menu to confirm (see
for details).
If your system administrator defined a time limit for videoconferences, a message appears when the limit
is reached, and you can select one of the following:
User Guide for Scopia XT5000 Series Version 3.2
Setting Call Answering Preferences
on page 43):
Figure 28: Answering a video call
Action
Select to answer the call.
Select to reject the call.
Select to reject the call and set the
system to automatically reject all
future incoming calls without prompt.
For more information, see
Do Not Disturb to Block All Incoming
Calls on page 84.
on page 82 for details).
Description Using XT Remote Control Unit
Press
Press the right arrow key and
ok/menu.
Press the right arrow key twice
and ok/menu.
Enabling
on the XT Remote Control Unit. If your system is set to
Confirming Call Disconnections
(Figure
or ok/menu.
on page 83
Starting a Videoconference | 43