Table of Contents
Advertisement
Installation
Barrier Screen
A barrier screen is supplied with this appliance to install
on the RetroFire window cover. The barrier screen is
designed specifically to prevent any contact with the
glass of the fireplace which becomes very hot during
operation and remains hot when cooling.
It is easier to install the screen on the window cover
first, before hooking the window cover to the fireplace.
1. Hook the top of the screen by inserting its tabs into
the slots in the window cover.
2. Push the screen up and insert the lower tabs into
the slots of the window cover. Pull the screen down
to ensure the lower tabs are well inserted.
Window Cover
Hook the window cover with sceen attached to the top
of the firebox. Push the bottom against the firebox to
attach the magnets.
36
Barrier Screen/Window Cover/Vent Shield
1
2
RF24JD-CA
shown;
same for CL
Top Vent Shield (if necessary)
The top vent shield is designed to install on top of the
firebox in front of the vent plate to hide the vent plate
and vent liners when visible.
Cut the top of the vent shield to size if necessary and
place it in front of the vent plate as indicated.
Appliance Identifi cation
Data Plate
Pull out data plate from
underneath appliance and
mark clearly which
appliance and vent plate
are being used in this
installation for future
reference.
Front Cover of
Installation Manual
Identify on the front
cover of the installation
manual which appliance
and vent plate model
are being used in this
installation for future
reference.
20,000
6,500
RF24JDN-CA
3.2"
RF24JDN-CL
FOR NATURAL GAS
POUR LE GAZ NATUREL
5.0"
580
RF24DN204625
CIRCULATING FAN KIT 555CFK
VENTILATEUR POUR CIRCULATION D'AIR 555CFK
120V, 60Hz, LESS THAN 1A
120V, 60Hz, MOINS DE 1A
LPG CONVERSION KIT RAJD24PK KIT DE CONVERSION AU GAZ PROPANE RA24JDPK
#4006519
4006510/01
Advertisement
Table of Contents
