Remote Control Box; Installing The Remote Control Box - TOHATSU 50 Owner's Manual

2. REMOTE CONTROL BOX
The following explains installation for right-hand driving.
1 Installing the Remote Control Box
I Position the Remote Control Box in a place that will not interfere with
handling of controls. levers and switches. Confirm that there are no obstacles
in the passage of remote control cables.
W Determining the Remote Control cable length:
Use distances "A" and "B". as depicted in the illustrations. as guide lines for
the Remote Control cable length. and add an additional 300mm (one
foot).cable length = "A" + "B" + 300mm (one foot)
1 NOTE
I
Do not sharply bend the remote
conlrol
cable lo a radiur
of
203mm
(8
in.) or
less as this will interfere with cable operation.
A
CAUTION
To prevent accidental running of the engine, which could result in an
injury. DO NOT connect the battery until the installation of the Remote
Control Box and the engine is complete.
18