Escene ES/DS/410 User Manual page 67

3.2.15 LDAP Lookup for PreDial/Dial
Description: This setting can be used to enable call out line identification using LDAP.
When the setting is turned
"Enabled", the phone performs an LDAP number search for PreDial or Dial status.
Valid Values: <Enabled>, <Disabled>
Default Value: Disabled
3.3 Example for Configuration
You can use the below settings as a starting point and adjust the filter and display attributes
according to your needs.
LDAP Name Filter: (&(telephoneNumber=%s)(sn=%))
LDAP Number Filter: (&(telephoneNumber=%s)(sn=*))
Server Address: 192.168.200.254 #####this setting is relate with the server configuration.
Port: 389
Base: dc=Escene,dc=cn
User Name: cn=manager,dc=escene,dc=cn
Password: *****
Max.Hits: 50
LDAP Name Attributes: cn sn displayName
LDAP Number Attributes: Mobile telephoneNumber ipPhone
Protocol: Version 3
Search Delay(ms)(0~2000): 0
LDAP Lookup for Incoming Call: Enabled
LDAP Sorting Results: Enabled
LDAP Lookup for PreDial/Dial: Enabled
4. Configuration on Escene Phone
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
#####this setting is relate with the server configuration.
#####this setting is relate with the server configuration.
#####this setting is relate with the server
configuration.
#####this setting is relate with the server configuration.
#####this setting is relate with the server configuration.
ES/DS410 IPPhone
www.escene.hk/en