Table of Contents
Advertisement
"ipPhone"field starting with the entered prefix.
￠ (&(telephoneNumber=%s)(sn=*))
Returns all LDAP records which have the "sn" field set and the
"telephoneNumber" field starts with the entered prefix.
3.2.3 Server Address
Description: This setting refers to the DNS name or IP address of the LDAP server.
Default Value: 0.0.0.0
Example:
￠ 192.168.1.100
￠ ldap.company.com
3.2.4 Port
Description: This setting specifies the LDAP server port.
Default Value: 389
3.2.5 Base
Description: This setting specifies the LDAP search base (the distinguished name of
the search base object) which corresponds to the location in the directory from
which the LDAP search is requested to begin. The search base narrows
the search scope and decreases directory lookup time. If you have
multiple organizational units in your directory (for example, OU=Sales in
O=COMPANY and OU=Development in O=COMPANY), but the "OU=Sales"
organization never uses AOL AIM, you can restrict the lookup to the
OU=Development subtree only by entering providing the following search base:
OU=Development, O=COMPANY. Other examples see below.
Default Value: <blank>
Examples:
￠ o=UNIVERSITY OF NEW ORLEANS,c=US
￠ o=SFU,c=CA
￠ dc=escene,dc=cn
3.2.6 User Name
Description: This setting specifies the bind "Username" for LDAP servers.
Most LDAP servers allow anonymous binds in which case the setting can be left
blank. However if the LDAP server does not allow anonymous binds, you will need to
provide the Username and Password allowed to query the LDAP server.
Default Value: <blank>
Escene Communication
www.InternetVoipPhone.co.uk | sales@internetvoipphone.co.uk | 0800 088 48 46
ES/DS410 IPPhone
www.escene.hk/en
Advertisement
Table of Contents
