Basic Operation - Sharp AY-AP9KR Operation Manual

BASIC OPERATION

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature setting
and mode are automatically selected accord-
ing to the room temperature when the unit is
turned on.
Modes and Temperature Settings
Room temp. Automatic Operation
at operation
Temperature Setting
Mode
start-up
Below 21˚C HEAT
21˚C-24˚C DRY
24˚C-26˚C COOL
26˚C-28˚C COOL
Above 28˚C COOL
2
5
3
1
4
23˚C
Room Temp. -2˚C
24˚C
25˚C
26˚C
GB-5
1
Press the MODE button to select the
operation mode.
AUTO HEAT
2
Press the ON/OFF button to start
operation.
• The red OPERATION lamp (
will light.
3
Press the THERMOSTAT button to set
the desired temperature.
AUTO/DRY MODE
• The temperature can be changed up to 2°C
above or below the temperature automatically
determined by the air conditioner.
COOL/HEAT MODE
• The temperature can be set within the
range of 18 to 32°C.
4
Press the FAN button to set the desired
fan speed.
AUTO SOFT
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
5
To turn off the unit, press the ON/OFF
button again.
• The red OPERATION lamp (
will turn off.
COOL DRY
) on the unit
LOW HIGH
) on the unit