Basic Operation; Operation Condition - Sharp UHL Series Operation Manual

BASIC OPERATION

OPERATION CONDITION

Indoor
Mode
Temp.
Upper limit 32°C
Cooling
Lower limit 21°C
• The build-in safety device may prevent
the unit from operating when used out of
this range.
• Condensation may form on the air outlet
if the unit operates continuously in the
COOL or DRY mode when humidity is
over 80%.
1
Press the MODE button to select the
operation mode.
2
Press the ON/OFF button to start opera-
tion.
• The green OPERATION lamp (
TO TURN OFF
Press the ON/OFF button again.
2
• The green OPERATION lamp (
3
Press the THERMOSTAT button to set
the desired temperature.
3
(AUTO/DRY mode)
The temperature can
be changed up to ±2°C
4
from the automatic
setting.
1 (COOL mode)
The temperature setting
range: 14-30°C.
(16-30°C for UEY model)
4
Press the FAN button to set the desired
fan speed.
NOTE:
AUTO MODE
In the AUTO mode, the temperature setting and
mode are automatically selected according to the
room temperature when the unit is turned on.
Outdoor
DRY MODE
Temp.
The fan speed is preset to AUTO and cannot be
43°C
changed.
21°C
WHEN POWER FAILURE OCCURES
This air conditioner has a memory function to store
setting when a power failure occurs.
After power recovery, the unit will automatically re-
start in the same settings which were active before
the power failure, except for TIMER, POWERFUL
JET, COMFORT, BABY MODE, SELF CLEAN set-
tings.
EN-5
AUTO COOL DRY
AUTO SOFT LOW
) will light up.
) will turn off.
HIGH