Basic Operation - Sharp AH-XP10YH Series Operation Manual

BASIC OPERATION

NOTE:
AUTO MODE
In the AUTO mode, the temperature setting and mode are automatically selected
according to the room temperature when the unit is turned on.
For the premium models, the setting temperature is corrected by the control of
the motion sensor.
DRY MODE
The fan speed is preset to AUTO and cannot be changed.
WHEN POWER FAILURE OCCURS
This air conditioner has a memory function to store setting when a power failure occurs.
After power recovery, the unit will automatically re-start in the same settings
which were active before the power failure, except for TIMER, SUPER JET ,
BEST SLEEP, BABY MODE, ECO MODE, SELF CLEAN settings.
OM B088 EN+TH+VN+CS.indb 7
1
Press the MODE button to select the
operation mode.
AUTO
2
Press the ON/OFF button to start operation.
• The OPERATION lamp ( ) will light up.
• If the PLASMACLUSTER operation is
activated, the lamp will turn blue, otherwise,
the lamp will turn green.
TO TURN OFF
2
Press the ON/OFF button again.
• The OPERATION lamp ( ) will turn off.
4
3
Press the THERMOSTAT button to set
the desired temperature, you can set
3
temperature in 0.5 °C increments.
1
(AUTO/DRY mode)
The temperature can be
changed up to ±2.0°C from
the automatic setting.
(COOL mode)
The temperature setting
range: 14.0-30.0°C.
4
Press the FAN button to set the desired
fan speed.
AUTO BREEZE QUIET
In FAN mode, fan speed cannot be set to AUTO.
BREEZE QUIET
EN-7
COOL DRY FAN
SOFT LOW HIGH
SOFT LOW HIGH
2022/6/21 13:16:19