Basic Operation - Sharp AE-X7FR AE-X9FR Operation Manual

Table of Contents

Advertisement

BASIC OPERATION

MODE
1h
FAN
SWING
SET/C
Press the MODE button to select the op-
1
eration mode.
Press the ON/OFF button to start opera-
2
tion.
2
• The red OPERATION lamp (
will light.
5
Press the THERMOSTAT button to set the
3
3
desired temperature.
• In the AUTO and
1
DRY modes, the tem-
perature
changed in 1°C incre-
ments within the
range of 2°C higher
4
to 2°C lower from the
temperature auto-
matically determined
by the air conditioner.
• In the COOL and HEAT modes, the tempera-
ture can be set within the range of 18 to 32°C
Press the FAN button to set the desired fan
4
speed.
• In the DRY mode, the fan speed is preset to
AUTO and cannot be changed.
To turn off the unit, press the ON/OFF but-
5
ton again.
• The red OPERATION lamp (
will turn off.
E-8
AUTO
HEAT
COOL
(Example: 1°C higher)
can
be
(Example: 2°C lower)
AUTO
SOFT
LOW
DRY
) on the unit
C
C
HIGH
) on the unit

Advertisement

Table of Contents
loading

Subscribe to Our Youtube Channel

Table of Contents