Pfremote Configuration Tool - Dalsa 1M28-SA User Manual

36

3.2 PFRemote Configuration Tool

The pfremote.exe is a remote configuration tool for the 1M28, 1M75, and 1M150 cameras. With
the PFRemote, you can:
•
•
•
•
•
•
•
Install PFRemote
A 1M28_1M75_1M150_PFRemote_Software.zip file is provided on the CD shipped with the
camera. Unzip the 1M28_1M75_1M150_PFRemote_Software.zip and copy the files contained
in the zip file to a directory on your computer. Alternately, the latest version of the software is also
available at
Opening PFRemote
Before running PFRemote, make sure that you have installed your framegrabber and framegrabber
i
software.
To begin using the PFRemote:
For further details
1.
on using the
PFRemote and how
In the PFRemote folder:
to configure the
camera, refer to the
2.
help file.
In the PFRemote dialog box:
To open the help To open the help To open the help To open the help
3.
file: file: file: file:
1. On the Help
menu, click Help.
Alternately, you can
press F1.
03-32-00525-04
PRELIMINARY
Control basic camera functions, such as gain, frame rates, and exposure times
Set exposure time
Set a region of interest
Set LinLog parameters
Set camera skimming
Read and alter camera registers
Save factory settings to your local computer
http://vfm.dalsa.com/docs/docs.asp
If it is not already open, open your framegrabber software with the configuration for the
1M28, 1M75, or 1M150 camera.
Double-click PFRemote.exe.
Right click on the COM port that the camera is connected to and select Open.
Figure 29: Opening a Camera with PFRemote
1M28, 1M75, and 1M150 User's Manual
in the "Software" folder.
DALSA