Software Interface: Controlling The Camera; Overview - Dalsa 1M28-SA User Manual

1M28, 1M75, and 1M150 User's Manual
Software Interface: Software Interface:
Software Interface: Software Interface:
Controlling the Camera Controlling the Camera
Controlling the Camera Controlling the Camera

3.1 Overview

Many camera features can be controlled through the serial interface. The camera can also be used
without the serial interface after it has been set up correctly.
To configure the camera through the serial interface, you must use the PFRemote configuration
tool. For details on using the PFRemote, refer to the next section.
You can also configure the camera through the PFLIB application programming interface. For
more information, refer to page 48.
Camera Serial Port Defaults
•
•
•
•
•
DALSA
PRELIMINARY
8 data bits
1 start bit
1 stop bit
No parity
9.6Kbps
35
3
03-32-00525-04