Dalsa 1M28-SA User Manual page 15

1M28, 1M75, and 1M150 User's Manual
Figure 8: Characteristic Curves of the DS-11-01M28 using an Integration Time of t
Wavelength of λ = 850 nm
To modify these values, use the PFRemote software tool. Useful parameters are:
1.
2.
3.
4.
The value LL1 must be greater than LL2. Values (LL1, LL2) larger than 80.1 cause the picture
quality to be degraded. Setting values larger than 81.3 no longer influence the characteristic curve
significantly (Figure 3). In this case, unwanted effects like offset between the two fields are
possible.
DALSA
PRELIMINARY
250
200
150
100
50
0
0.0E+ 00 5.0E-05
37.5 < LL1 < 75.0
0.0 < LL2 < 56.3
LL2 < LL1
0 < COMP < 10
1.0E-04 1.5E-04
Intenstiy / W/cm2
15
= 10 ms and a
int
10ms LINLOG 25
10ms SKIM LINLOG 25
10ms LINLOG 75
10ms LINLOG 75 25 1
10ms LINLOG 75 25 5
2.0E-04 2.5E-04
03-32-00525-04