Cabinet Design And Emc; Information; General; Safety Information - Siemens SINAMICS S120 Manual

Cabinet design and EMC

7.1

Information

7.1.1

General

The modular concept of SINAMICS S120 allows a wide range of potential device
combinations. For this reason, it is impossible to describe each individual combination. This
section instead aims to provide some basic information and general rules on the basis of
which special device combinations can be constructed and to ensure electromagnetic
compatibility.
The SINAMICS S120 components are designed for installation in enclosures, which can take
the form of cabinet units or control boxes made of steel that provide protection against shock
and other environmental influences. They are also part of the EMC concept.
7.1.2

Safety information

Hazards during transport and replacement of components
When transporting the devices and replacing components, note the following:
• Some of the devices and components are heavy or top heavy.
• Due to their weight, the devices must be handled with care by trained personnel.
Serious injury or even death and substantial material damage can occur if the devices are
not lifted or transported properly.
Chassis power units
Manual, (GH3), 01/2013, 6SL3097-4AE00-0BP3
WARNING
7
303