System Config > Alarm; System Config > General - Watchguard DVR4ENTPACK3 User Manual

System Config > Alarm

Alarm Trigger :
Alarm Trigger
Enable or disable Email and FTP notification
function.

Alarm Method :
Alarm Method
Two notification methods
— Email and / or FTP.

Post Numbers Post Numbers :
Set MJPEG pictures (1-10 pictures).

Alarm Duration Alarm Duration :
Set the duration time of motion trigger recording
(5 SEC, 10 SEC, 20 SEC, 40 SEC).

Alarm Refres h :
Alarm Refresh
Clean the alarm message "
on the screen.
System Config > General
 Get the information of the DVR firmware version
in this window.

Select "TURBO" Step" (1 - 10) Select "TURBO" Step" (1 - 10)
To speed up menu selection or the control of the
PTZ camera under video web servers, users can
activate "TURBO" function by clicking this
button. Users are allowed to change the turbo
steps from 1 to 10.
Ex: If the value of turbo step is "5", it means that
when users press one of the button
up/down/left/right, one click is as clicking 5
times.

MAX LOG LIST:
MAX LOG LIST
Set the maximum number of log list.

Server Log:
Server Log
Press "Server Log" button to enter the server log
list window.

Title Title:
Title Title
Name the title which will be shown on the top of
the AP live viewer (up to 15 characters).
Note:
Note:
Email Notification:
" which is shown MJPEG pictures will be made at your designated space set in "File
Path", plus an e-mail contained with the MJPEG pictures (1-10
pictures) to be sent to the address which is set under "Mail".
FTP Notification:
MJPEG pictures will be made at your designated space set in "File
Path", plus a FTP file contained with the MJPEG pictures (1-10
pictures) to be sent to the address which is set under "FTP".
- 36 -
4CH DVR