Searching For Footage - Watchguard DVR4ENTPACK3 User Manual

Searching for Footage

There are two ways to search the HDD for footage – Quick Search and Event Search. Both methods are outlined below.
Please see page 17 for an explanation of the Search functions.
Quick Search

Press "MENU" and scroll down to "EVENT INFO  QUICK SEARCH". Press "ENTER" to open the quick
search menu.

Using the navigation buttons, select and edit the following settings:
Date: Set the Date/Time/Year to search for footage
o
Search HDD: Select which HDD to search,
o

Press "START" to begin searching

If any footage is found it will begin playback
Event Search

Press "MENU" and scroll down to "EVENT INFO  EVENT SEARCH". Press "ENTER" to open the quick
search menu.

Using the navigation buttons, select the following settings:
Date: Set the Date/Time/Year to search for footage
o
Channel: Select which channel to search for footage (1/2/3/4)
o
Event: Select between MOTION or ALARM
o
Search HDD: Select which HDD to search.
o

Press "START" to begin searching

If any footage is found, it will begin playback.
Once playback begins, use the navigation buttons on the remote/DVR Front Panel/Software Viewer to perform playback
functions (PLAY/PAUSE/REWIND/FAST-FORWARD/STOP)
- 25 -