Table of Contents
Advertisement
Networking
Important:
Before setting up remote access for your NVR, you will need to have a good understanding of
computer networking. Otherwise please seek the assistance of a qualified I.T. person.
Choose "ADVANCED CONFIG" and then "NETWORK" to set the Static IP address.
Choose "Static" to allocate an IP address manually, and then enter the IP Address, Subnet mask, and
Gateway.
For Example we have used:
Network Type: DHCP –
IP Address:
192.168.1.10
Gateway:
192.168.1.1
Subnet:
255.255.255.0
DNS:
192.168.1.1
Port:
88
ADVANCED CONFIG
CONNECTION
CAMERA
DETECTION
ALERT
NETWORK
DISPLAY
RECORD
NOTIFY
EXIT
Should you wish to set your DVR up for internet access, you will require:
•
An ADSL connection of 512/512 minimum (ADSL2 recommended).
•
An External Static IP address from your Internet Service Provider.
•
An ADSL Modem which supports Port Forwarding.
•
A network connection between your NVR and the ADSL Modem.
•
Set your DVR up on the local network by giving it a compatible IP Address.
•
In your modem Port Forward port 88 to the IP address of your DVR.
we have chosen DHCP as the default. Should auto connect with most networks.
WAN
LAN
NETWORK TYPE
IP
GATEWAY
NETMASK
PRIMARY DNS
SECONDARY DNS
PORT
E-MAIL
DDNS
10
DHCP
192.168.1.10
192.168.1.1
255.0.0.0
192.168.1.1
0.0.0.0
88
Advertisement
Table of Contents
