Table of Contents
Advertisement
Advanced Config > Network
Note: If you do not have a thorough understanding of TCP / IP technology it is recommended that you employ the
services of a network technician to help you.
For more information on setting up the remote connection component, please see Section 3 of this manual.
NETWORK TYPE
IP ADDRESS
GATEWAY ADDRESS
NETMASK ADDRESS
PRIMARY DNS ADDRESS
SECONDARY DNS ADDRESS
PORT
Network Type
Configures which network connection the DVR uses. Select STATIC IP, DHCP or PPPoE network connection.
After choosing which type of connection to use, press the ENTER button to enter the relevant information for each type.
IP Address
Enter the IP address of the DVR.
Gateway Address
Enter the Gateway address of the DVR.
Network Address
Enter the Network address of the DVR.
Primary DNS Address
Set the primary DNS server for the DVR.
Secondary DNS Address
Set the secondary DNS server for the DVR.
Port
Set the Port that the DVR should run on. Default is 80.
N
E
T
W
O
R
K
N
E
T
W
O
R
K
STATIC
245.1.10.1
245.1.10.1
245.1.10.1
203.021.020.020
230.021.020.020
0080
- 13 -
Advertisement
Table of Contents
