Performing A Usb Backup - Watchguard DVR4ENTPACK3 User Manual

Performing a USB Backup

Before beginning the backup, please ensure that:
1. The format of your USB flash drive is "FAT32" If it isn't; please format it to "FAT32" on your PC.
2. There is no data on the USB flash drive. If there is, it is advised to clear all data on the USB flash drive before
starting the backup.
Note: When the USB backup starts, you cannot operate the menu via the OSD or begin a network backup, in order to
keep the consistency of the video data.
Performing the Backup:

Use the search function to locate the footage you wish to backup. (See page 25 for how to search for
footage)

Plug your USB drive into the DVR

Press "MENU" on the front panel of the DVR or the remote. Use the navigational buttons to move down the
menu to "BACKUP" and press "ENTER"

Using the navigational buttons, select the "START" and "END" times of the footage which is to be backed
up

Select which channels you wish to include in the backup (1, 2, 3 and/or 4)

Press "START"

Please wait while your data is copied to the USB drive. While the backup is running, you cannot operate the
menu via the OSD or begin a network backup.

When the backup is finished, the selected footage and backup player will have been copied to the USB.
- 20 -