Setting Up The Dvr Directly To A Computer - Watchguard DVR4ENTPACK3 User Manual

Setting up the DVR directly to a computer

To Setup Network Access to the DVR you will need:

Digital Video Recorder (DVR)

A cross-over network cable (Not included with kit)

Basic computer networking skills
How to setup Network Access between your Computer and your DVR

Plug one end of the cross-over cable into the DVR and the other end into your computer.

Allocate your DVR an IP Address and your computer a different IP address. Ensure the addresses are within the
same range. I.E. Your DVR can be 192.168.0.1 and your PC can be 192.168.0.2

Attempt to 'ping' the DVRs IP address from your computer, using an MS-DOS prompt

Once you can successfully 'ping' your DVR, you will be able to connect to the DVR via your computer using the
included remote access software – Software Viewer E.
- 23 -