Table of Contents
Advertisement
Hard Drive Installation
Unscrew the two screws respectively on the two sides of the upper cover.
Unscrew the four screws on the back side of the upper cover.
Make sure your hard drive is set to Master. Refer to the hard drive manufacturer's website if you are unsure.
Mount the hard drive in the internal bracket and attached the power and data cables.
Fig. 1
Fig. 1
Fig. 3
Fig. 3
Fig. 2
Fig. 2
- 44 -
Fig. 4
Fig. 4
Fig. 5
Fig. 5
Advertisement
Table of Contents
