Advanced Config > Alert - Watchguard DVR4ENTPACK3 User Manual

Advanced Config > Alert
Internal Buzzer
Sets the sound of the internal buzzer.
Key Buzzer
Configures whether to sound the buzzer when pressing buttons on the front panel.
Video Loss Buzzer
Configures whether to sound the buzzer when video loss is detected.
Motion Buzzer
Configures whether to sound the buzzer when motion is detected.
Alarm Buzzer
Configures whether to sound the buzzer when the internal alarm is triggered.
HDD Buzzer
Configures whether to sound the buzzer when the hard drive is full.
Alarm Duration (SEC)
Sets the amount of time to record once an alarm event has been detected.
HDD Nearly Full (GB)
Sets the amount of remaining hard drive capacity required before the alarm will sound.
INT. BUZZER
KEY BUZZER
VLOSS BUZZER
MOTION BUZZER
ALARM BUZZER
HDD BUZZER
ALARM DURATION (SEC)
HDD NEARLY FULL (GB)
A L E R T
A L E R T
ON
ON
ON
ON
ON
ON
05
05
- 12 -