System Config > Network > Ftp; System Config > Dvr; System Config > Device - Watchguard DVR4ENTPACK3 User Manual

System Config > Network
 When the recording is triggered by an
alarm or a motion, a video copy file
can be captured. And the DVR will
upload the captured images to the
assigned FTP site.
 Enter the detailed FTP information.
***Note***:
***Note***:
To activate the FTP notification
function, please enable the function
of FTP notification in the "Alarm"
setting first. (Refer to Pg 26).
 After setting, press "APPLY" to
confirm.
System Config > DVR

Each camera channel can be adjusted
independently.

Select the desired camera channel. Press
" E E d d i i t " to enter the setting box. t

Title:
Title:
Enter the camera channel name up to 6
characters.

Adjustment:
Adjustment:
Adjust the BR (brightness) / CT (contrast) /
SU (saturation) / HU (hue) / REC (recording)
of the camera.

After setting, press "OK" and then press
"APPLY" to confirm.
System Config > Device

Select the desired channel of the installed
external device.
Press " E d i t " to enter the setting box.
E d i t

Device Type: Device Type
Choose either general camera or PTZ
camera.

ID No. :
ID No.
Set the ID number (0 ~ 255) of the installed
external PTZ device.

Protocol Type :
Protocol Type
Choose " N O R M A
N O R M A
brand camera.
Choose " P - D " protocol for PELCO-D
P - D
protocol camera.

Baud Rat e :
Baud Rate
Set the baud rate of each channel
(2400, 4800, 9600, 19200, 38400, 57600,
115200).

After setting, press "OK" and then press
"APPLY" to confirm.
> FTP
L " protocol for our own
L
4CH DVR
- 31 -