Alarm Memory - Watchguard N517Series II User Manual

4.6. Alarm Memory

This feature is used after the alarm has been triggered. It recalls the last 10 zones
which have triggered the alarm.
TO HEAR THE ALARM MEMORY
1.
Safety Lock must
be off
2.
Press both buttons
for 3 seconds
3.
Press 1 time
4.
Press 1 time
5.
Alarm Memory
Ensure Safety Lock has been turned off within the last 5
minutes. See Section 4.2.
Enter Programming mode by pressing buttons 1 & 2
together for 3 seconds. The siren will beep 3 times to
confirm you have entered programming mode.
Within 3 seconds, press Button 2 to select special
features. You will hear 2 beeps as confirmation.
Within 30 seconds, press Button 1 to hear the Alarm
Memory.
The system will begin to beep the Alarm Memory.
During this time, the siren will beep the number of times
of the last 10 zones which have been triggered. The last
memory heard is the most recent zone triggered. If two
previous alarms were recorded i.e. from zone 1 and zone 3
the siren will beep once for Zone 1, there will be a 1
second pause then 3 beeps for Zone 3.
The system will automatically exit programming mode.
29