Table of Contents
Advertisement
Menu System
Navigating the Menu
The following buttons are used to navigate through the menu.
Press "MENU" button to enter the
(OSD) On Screen Display menu list
Menu: Press to enter the main menu
Enter: Press to confirm settings/selections
List: To quickly search the recorded files by event, press to show the event list. Select one event and press "Enter" to
playback the selected file.
Play: Press to play the recorded video.
Slow: Under the playback mode, press to slowly playback the recorded file.
Zoom: In the live or playback mode, press to enlarge the image of the selected channel.
SEQ: Press to activate the call monitor function and press again to quit.
: Press to show the four-channel display mode.
Power: Press long enough to turn on/off the DVR
1~4: Press one of the buttons to select the channel to display
(/+) / (/-) / () / (): Press one of these four buttons to move up/down/left/right. Under the playback
mode, press these buttons to pause (), stop (), rewind () or fast-forward () the playback file.
Under the setting mode, press () / () to change the setting in the menu.
Audio (SLOW + ZOOM): Press "SLOW" and "ZOOM" at the same time to select live or playback sounds from the
audio channels.
PTZ (SEQ +
): Press "SEQ" and "
Adjust PTZ Angle: Press /// to turn up/down/left/right.
USB Port: To quickly backup or upgrade firmware/OSD, you can insert a compatible USB flash drive into the USB
port. Before using the USB flash drive, please use your PC to format the USB flash drive as FAT32 first.
The default admin password is 0000.
Enter the default password by pressing
"ENTER" 4 times
" at the same time to enter/exit the PTZ control mode.
- 5 -
Advertisement
Table of Contents
