Table of Contents
Advertisement
AP Software – Camera Screen
The AP software works by emulating the buttons on the front panel of the DVR. Anything you can do on the DVR can also
be done in the AP software.
a)
Frame Rate
b)
Data Rate (bandwidth being used)
c)
Connect / Disconnect from DVR
d)
Switch display resolution between 320 x 276 and 640 x 552.
e)
Image Quality (High, Medium, Low)
f)
Take a Snapshot. Saved in the location set in System Config > General > File Path > Snapshot Path.
g)
Start and stop recording. Saved in the location set in System Config >General > File Path > Record Path.
This will record what you see on screen to your own computer.
h)
Open the System Config menu.
i)
The number of users connected to the DVR.
j)
Theses buttons all emulate the front panel of the DVR. Please refer to the quick installation guide and the menu
section above. Hover your mouse cursor over the button to get a description of what it does.
j.
b
a
e
c
d
- 27 -
f
g h
i
Advertisement
Table of Contents
