System Config > Detection - Watchguard DVR4ENTPACK3 User Manual

System Config > Detection

Select the desired channel, and
press " E E d d i i t " to enter the motion t
detection sensitivity and area
setting box.

Motion Detection Sensitivity:
Motion Detection Sensitivity
Set the detection sensitivity in 4
different adjustable factors.
LS: The sensitivity of comparing
LS:
two different images. The smaller
the value, the higher sensitivity for
the motion detection.
SS: The sensitivity towards the
SS:
size of the triggered object on the
screen (the number of motion
detection grids). The smaller the
value, the higher sensitivity for the
motion detection.
TS: The sensitivity towards how
TS:
long the object stays in the
detection area to get triggered.
The smaller the value, the higher
sensitivity for the motion detection.
RE: The value of RE is a reference
RE:
for the detection. The bigger the
value, the higher sensitivity for the
motion detection.

Alarm:
Alarm:
Select LOW / HIGH for the alarm
polarity.

Motion Detection Area:
Motion Detection Area
By clicking the area with your
mouse, one can choose the
motion area to be detected.
under detected area is transparent
under detected area is transparent
while the while the undetected area is in undetected area is in
pink color .
pink color.
*Click "Select All" to activate the
detection area as the full area.
*Click "Clear All" to clean the
previously selected detection area.
After setting, press "OK" and then
press "APPLY" to confirm.
The
The
- 32 -