Table of Contents
Advertisement
Quick Links
Professional Surveillance Pack
Digital Video Recorder with 8 Security Cameras
'QUICK INSTALLATION GUIDE'
Digital Video Recorder (DVR)
- Advanced H.264 Video Compression Technology
- Multiplex Operation
- Long Recording Duration
- Intelligent Video Motion Detection Recording
- Remote Network Surveillance & Backup Functions
- Easy to operate with remote or USB mouse
- System Auto recovery after power loss (blackout)
www.watchguardalarms.com.au
MODEL: DVR8ENTPACK3
N517
4 x 15 Infrared Day/Night Cameras
- High Quality CCD Image sensor
- 14 x Infrared LEDs
- 520 TVL Resolution
4 x Indoor Dome Cameras
- High Quality CCD Image Sensor
- 480 TVL Resolution
Advertisement
Table of Contents
Related Manuals for Watchguard DVR8ENTPACK3
Summary of Contents for Watchguard DVR8ENTPACK3
- Page 1 MODEL: DVR8ENTPACK3 Professional Surveillance Pack Digital Video Recorder with 8 Security Cameras ‘QUICK INSTALLATION GUIDE’ N517 Digital Video Recorder (DVR) 4 x 15 Infrared Day/Night Cameras - Advanced H.264 Video Compression Technology - High Quality CCD Image sensor - Multiplex Operation...
-
Page 2: Package Contents
Package Contents Before commencing installation, please ensure you have all the parts listed below.) 1 x 8 Channel Digital Video Recorder with 1TB Hard Disk Drive & PC Software for Remote View ● Advanced H.264 Video Compression Technology for High Quality Images and Small File Szes ●... -
Page 3: Installation
Installation Before installing this unit, please read through the following points: Do not place cords from the AC adapter where they can be pinched or stepped on. Do not place heavy objects on cords, or cover cords with rugs or carpet. ... -
Page 4: Quick Start Up Guide
Plug both Power adaptors into a Power-Point and switch the power-point ON The Power LED at the front of the DVR should now be illuminated red and the unit will make a loud beep sound. Quick Start up Guide Make sure your TV/Monitor is ON and set to the appropriate AV channel if required ... -
Page 5: Quick Menu: Open
NOTE: If users change the date or time accidentally when the recording function is activated, it’s recommended to clear all HDD data, and start recording again. Menu Display and Operation with USB Mouse The system supports operation via USB mouse (not included). See below for an explanation of how to operate your DVR using the mouse input. - Page 6 Main Menu Right click anywhere on the screen or press the “MENU” button to bring up the main menu. Right click again to exit the menu. QUICK START: Click to set the status display, image settings, and date & time. DATE SETUP: Click to set the date display and daylight savings.
- Page 7 To Begin Recording Once you have successfully set the Date and Time, exit the OSD Menu by pressing the “MENU” button to return to normal viewing. By default, the DVR will begin recording when it is properly connected to the cameras and has an installed HDD.
- Page 8 Recording Modes The DVR offers three recording modes, MANUAL RECORD, EVENT RECORD and TIMER RECORD. MANUAL RECORDING (continuous recording): The DVR will begin recording when the cameras are properly connected and a HDD is installed. It is set to this mode by factory default. EVENT RECORDING (triggered by motion and external alarm): When this function is activated, the recording is triggered by motion or external alarms, indicated by the sign "...
-
Page 9: Slow Playback
Typical Viewing Screen The image below shows a typical screen shot from an installation System Time HDD Overwrite Mode ** Overwriting View Remaining Available Capacity of Internal HDD When the HDD is full under “Overwriting” recording mode, the previously recorded data may be overwritten without further warning ●... - Page 10 PLAYBACK CONTROLS: Use the mouse to hover over the bottom of the display screen to bring up the playback navigation bar Typical Playback Screenshot from DVR Play-Back Time The type of recording image size 2006-MAY-12 [FRI] (Time of Actual Event) (Frame or CIF) 15:12:32 Searching for data...
- Page 11 Use the mouse or navigation buttons “▲▼◄► “ to select which list you’d like to view Click the event type/press “ENTER” to view the selected list. Once in the sub menu, use the mouse/navigation buttons to select the event you’d like to view. Double click/press “ENTER”...
-
Page 12: Operation
Operation HDD: HDD is reading or recording “LED LIGHTS” HDD Full: DVR is powered on “MENU” Press “MENU” button to enter the main menu. “ENTER” Press “ENTER” button to confirm the settings. Press “LIST” button to enter the search menu. “LIST”... -
Page 13: Troubleshooting
TROUBLESHOOTING Please refer to the FAQ table below for easy troubleshooting. The table below describes some typical problems and their solutions. Please consult these guides before contacting your DVR dealer. PROBLEM SOLUTION No power - Check power cord connection. - Confirm that there is power from the outlet. - Ensure that the 12V 3A power supply is connected to the cameras and the 19V 2A is connected to the DVR Not working when pressing any button... -
Page 14: Limited Warranty
Limited Warranty Cornick Pty Ltd (Seller) warrants its products to be in conformance with its own plans and specifications and to be free from defects in materials and workmanship under normal use and service for twenty four months from the date of original purchase. Sellers obligation shall be limited to repairing or replacing, at its option, free of charge for materials or labor, any part which is proved not in compliance with Sellers specifications or proves defective in materials or workmanship under normal use and service. - Page 15 PLEASE CUT OUT & RETURN THIS INFORMATION WITHIN 14 DAYS OF PURCHASE TO: RhinoCo Technology 9 Hannabus Place McGraths Hill NSW 2756 Australia M o d e l : D V R 8 E N T PA C K P r o f e s s i o n a l S u r v e i l l a n c e P a c k Wa r r a n t y C a r d Name Address Suburb...